6.35 किलोग्राम में कितने ग्राम होते हैं

6.35 किलोग्राम में कितने ग्राम होते हैं

In the world of measurements, the conversion from kilograms to grams is a fundamental one. It’s a conversion that often comes up in everyday life, whether you’re cooking up a storm in the kitchen, calculating weights for a science project, or simply curious about the intricacies of the metric system. In this article, 6.35 किलोग्राम […]

Continue Reading
Stability Testing of Pharmaceutical Products

Stability Testing of Pharmaceutical Products

The stability of a pharmaceutical product means how long it can keep its original form without any apparent changes affected by various environmental factors like temperature, humidity, light. In this SOP we will describe the Stability Testing of Pharmaceutical Products. 1. Purpose It is established to ensure that the product maintains the specifications throughout the […]

Continue Reading

Alkalinity Of Glass

In this Sop, we will explain the Alkalinity Of Glass, for Glass vials used in the Pharmaceutical Industry. 1. Purpose It is established to check the quality of glass, (alkalinity of glass )used for packing which is in direct contact with parenteral preparation. 2. Scope It is applicable to the Quality Control department. 3. Responsibility […]

Continue Reading

Handling Of Chemicals ,Reagents And Solutions In Laboratories

In this Sop, we will explain about Handling Of Chemicals, Reagents And Solutions In Laboratories in the Pharmaceutical Industry. 1.   PURPOSE This SOP describes the Handling Of Chemicals, Reagents And Solutions In Laboratories. 2.  SCOPE This sop is applicable to chemicals to chemicals, reagents and solutions used for chemical testing in QC Department. 3. RESPONSIBILITY […]

Continue Reading

Inprocess Control

1.  Purpose To ensure that the product in-process about to subject to the next step is according to the specifications. 2.  Scope It is applicable to In-process control. 3.  Responsibility QA Officer QC Analyst Production pharmacist Production manager Quality Control Manager 4. Introduction “In-process control” means checks performed during production in order to monitor and […]

Continue Reading

Raw Material Identification/Verification

  1. PURPOSE To lay down the clear procedure for identification/verification of incoming raw materials. 2.    SCOPE This procedure is applicable for identification/verification  of all raw materials received at Raw Material Stores. 3. RESPONSIBILITY Analyst Laboratory attendant 4.  ACCOUNTABILITY Quality Control Manager 5.    PROCEDURE Inspection of incoming raw material is an essential step […]

Continue Reading