SOP for Brookfield viscometer

SOP For Brookfield Viscometer

1. Purpose To ensure that Brookfield Viscometer is working properly. 2. Scope Brookfield Viscometer is applicable for analytical testing of suspension and liquid raw materials in the quality control department. 3. Responsibility Quality control manager Analyst 4. Introduction Viscosity is a measure of a fluid’s resistance to flow. it is to drive a spindle (which […]

Continue Reading
TOC Analyzer

SOP For TOC Analyzer

1. Purpose To provide a procedure for operating the TOC Analyzer. 2. Scope This covers the procedure for operating TOC Analyzer. MAKE: SKALAR  FormacsHT Total Organic Carbon Analyzer 3. Responsibility Analyst Quality Control Manager 4. Operation Operating instructions for TOC Analyzer  4.1 Follow these Checks before starting equipment 4.1.1 Use oxygen of minimum purity of […]

Continue Reading
FTIR 7600-Lambda Scientific

SOP For FTIR Spectrometer

1. Purpose To describe the procedure for operation and calibration of FTIR Spectrometer. 2. Scope This SOP is applicable for the operation and calibration of the  FTIR Spectrometer. 3. Responsibility Analyst 4. Accountability Quality Control Manager 5. General Cleaning of FTIR Spectrometer 5.1  Ensure that the power to the instrument is switched OFF before cleaning […]

Continue Reading
sop for waters hplc

SOP For Waters Gradient HPLC

1. Purpose To provide a procedure for the Operation of High-Pressure Liquid Chromatography. 2. Scope Applicable to HPLC for routine chemical analysis of in-process & finished products. 3. Responsibility Analyst Quality Control Manager 4. Operating Instructions 4.1. Check and ensure that the instrument is clean and calibration is valid. 4.2 Switch on the HPLC System one […]

Continue Reading