1. Purpose To ensure that Brookfield Viscometer is working properly. 2. Scope Brookfield Viscometer is applicable for analytical testing of suspension and liquid raw materials in the quality control department. 3. Responsibility Quality control manager Analyst 4. Introduction Viscosity is a measure of a fluid’s resistance to flow. it is to drive a spindle (which […]
Continue Reading
1. Purpose To provide a procedure for operating the TOC Analyzer. 2. Scope This covers the procedure for operating TOC Analyzer. MAKE: SKALAR FormacsHT Total Organic Carbon Analyzer 3. Responsibility Analyst Quality Control Manager 4. Operation Operating instructions for TOC Analyzer 4.1 Follow these Checks before starting equipment 4.1.1 Use oxygen of minimum purity of […]
Continue Reading
1. Purpose To provide a procedure for operating the UV-VIS spectrophotometer. 2. Scope This covers the procedure for operating UV-VIS Spectrophotometer. MODEL: UV-1700 with PC software MAKE: Shimadzu. 3. Responsibility Analyst 4. Accountability Quality Control Manager 5. Definition of UV-VIS spectrophotometer A device that produces a spectrum of ultraviolet light and is provided with a […]
Continue Reading
1. Purpose To describe the procedure for operation and calibration of FTIR Spectrometer. 2. Scope This SOP is applicable for the operation and calibration of the FTIR Spectrometer. 3. Responsibility Analyst 4. Accountability Quality Control Manager 5. General Cleaning of FTIR Spectrometer 5.1 Ensure that the power to the instrument is switched OFF before cleaning […]
Continue Reading
1. Purpose To provide a procedure for the Operation of High-Pressure Liquid Chromatography. 2. Scope Applicable to HPLC for routine chemical analysis of in-process & finished products. 3. Responsibility Analyst Quality Control Manager 4. Operating Instructions 4.1. Check and ensure that the instrument is clean and calibration is valid. 4.2 Switch on the HPLC System one […]
Continue ReadingIQ OQ PQ Overview Brief: Correct functionality and performance of scientific apparatus to obtain reliable and accurate analytical data therefore instrument qualification should be a part of any good analytical practice The contents of the qualification workbook are as follows. Installation Qualification (IQ) for performing and documenting the installation in a location selected by the […]
Continue Reading